Introducing the STREAMLINE® OVA-8 carbon fibre telescopic poles are designed in an ‘oval’ profile section, reducing the wear of the sections from the pole clamps.
This 5 Section, 100% Carbon pole has an extension of 5.1m while closing down to an impressive 1.3m. Comes complete with hose and brush.
Can I fit a Univalve? Yes. Section No.1 of your telescopic pole is 100mm shorter than all the remaining sections. This allows the Univalve to be positioned at the end of section one, sitting inside section No.2 and the remaining pole hose through the remaining sections. When the pole is fully collapsed the Univalve will not be visible. Works normally.
Pole stress - The anti-rotational oval shaped pole provides an additional feature - stiffness. More stability gives more control fand a huge “safety” plus. Flat sides also cancel out the “whipping effect” and ‘bouncing off the glass’ motions. Operators are more productive and work safer.
Hand ergonomics - The OVA-8's two flat sides sit more comfortably in an the hand and allow the tips of their fingers to sit on the flat edge. This requires less grip and therefore less hand fatigue.
Anti rotational pole sections - Eliminating the rotational spin of the pole section around the clamp area results in less wear of the pole material. Also, because of the anti spin pole section, our OVA-8 oval clamps work less due to only having to prevent the pole sections from moving up or down.
Check out the specs and watch the video review