sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: NHC.T Coupler 1/2in - Nylon w/tap RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: RBS1 Tap Protector Ball - each RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: 15.0001.77 Filler Gun with Trigger 1in Male RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: 532TVMA Replacement Adaptor Male thread for Trigger RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm RRP: Now: £6.24 Add to Cart sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: UNI-V Uni-Valve Flow Control by Ex-ceed Innovations Uni-Valve Flow Control THE MOST CONVENIENT WAY TO CONTROL WATER USAGE by Ex-ceed Innovations UNI-VALVE is Operated by Simply Pulling the Hose at the Base of Your Water Fed Pole Pull Hose Once to Turn Water On Pull Once... RRP: Now: £34.95 Add to Cart sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: NHC.T Coupler 1/2in - Nylon w/tap Hoselock style coupler WITH TAP. Connects to NHATA available seperately. (Only one supplied - image for illustrative purposes only) RRP: Now: £6.45 Add to Cart sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: PARTTAP6 Tap Complete Kit (Part Disconnect) 6mm - Steel Ball-valve tap 1/4" with male click connector on hose side, enabling you to disconnect from your reel and 6mm hosetail for permanent connection to pole tubing. Requires Q21FH6 for 6mm or Q21FH8 for 8mm to be fitted on hose (Sold separately) KIT... RRP: Now: £4.99 Add to Cart sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: RBS1 Tap Protector Ball - each Can extend the life of your tap and fittings. Each ball comes undrilled so you can easily fit to any size hose or tubing. Available as:SINGLE orPACK of 5 - SAVE over £2! RRP: Now: £1.55 Currently Restocking sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: FullTap-Kit Tap Complete (Full Disconnect) ALL SIZES - Steel Ball valve tap with click connectors both sides. Enabling you to completly disconnect from your pole AND hose. Connects to Q21MSS 6mm pole connector and Q21FH8 8mm hose connector(SOLD SEPERATELY) KIT COMPRISES OF: Q21FM Tap adaptor BBV1414MF Tap Q21MM... RRP: Now: £5.99 Add to Cart sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: PARTTAP8 Tap Complete Kit (Part Disconnect) 8mm - Steel Ball valve tap 1/4" with click connector on hose side, enabling you to disconnect from your hose. Requires Q21FH for 6mm hose or Q21FH8 for 8mm hose(Sold seperately) KIT COMPRISES OF: BHT1408 8mm Hose Tail BBV1414MF Tap Q21MF Tap... RRP: Now: £4.99 Add to Cart sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: BBV14FFB Tap/Flow Controller Threaded F-F 1/4"- Brass/Steel Blue New small lightweight, ball valve tap 1/4" female to 1/4" female. RRP: Now: £6.66 Add to Cart sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: 53190-38 Trigger/Valve Clamp - Plastic 38mm Trigger/Valve Clamp For Waterfed Pole Systems This Clamp Will Fit a Section 5 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: 15.0001.77 Filler Gun with Trigger 1in Male 1" hose barb swivel inlet 5 Bar max pressure 120 Lpm max flow 50°C max temperature 29mm outlet Reinforced polypropylene body NBR seals Polypropylene hose barb swivel inlet Reinforced PP & galvanised steel internals Trigger lock button RRP: Now: £10.57 Add to Cart sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: 532TVMA Replacement Adaptor Male thread for Trigger Replacement adaptor for your trigger. RRP: Now: £3.99 Add to Cart sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected × OK
sku: 532TV-GF Trigger Valve assembly w/gold fitting (requires trigger valve clamp) Waterfed pole shut-off trigger. When you've spent time and money purifying your precious fluid the last thing you want to do is waste it. Fits standard tubing - clear or black however for reinforced tubing e.g. Lite5 or Unger Green tubing please select... RRP: Now: £42.71 Add to Cart sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected
sku: 53190-42 Trigger/Valve Clamp - Plastic 42mm Trigger Valve Clamp for Waterfed Pole Systems This Clamp will fit a Section 6 For trigger requires 1 clamp For valve requires 2 clamps RRP: Now: £6.24 Add to Cart 1 2 Next 1 2 Next Compare Selected